Water Damage Restoration
Moisture mapping, extraction and structural drying for Seattle houses, whether the water came down from the roof or up from the ground.
Seattle Water Damage Restoration covers emergency water removal, structural drying, basement and crawl space water, burst and frozen pipes, sewage backup, flood and storm cleanup, roof and ceiling leaks, water heater and appliance leaks, mold inspection and remediation, and apartment and commercial losses. Each page lists warning signs, steps and national price references.
Fastest: call (833) 490-5225. Or send this and we call you back.
Start from where the water came in. A damp wall in a lower level or a white crust on concrete points to basement water damage, and water under the floor of an older house to a crawl space. A stain that grows in rain is usually a roof leak or ceiling damage. A pipe that split after a cold night is frozen pipe damage, and a corroded supply line in an old wall is a burst pipe.
Some services follow others. Structural drying is part of nearly every job, and mold inspection comes next when a leak ran for weeks. Water that rose through a floor drain is sewage cleanup, and water from a river or an atmospheric river is flood cleanup. Condo and office losses are covered under apartment and condo and commercial pages.
Moisture mapping, extraction and structural drying for Seattle houses, whether the water came down from the roof or up from the ground.
Pumps, extractors and moisture checks for standing water in Seattle basements, lower levels and living areas.
Extraction and drying for Seattle basements and daylight basements where winter groundwater, window wells or old drains let water in.
Cleanup and drying after a pipe fails in a Seattle house, from corroded galvanized lines to fittings behind plaster.
Extraction and drying after a freeze splits a pipe in a Seattle crawl space, exterior wall or unheated corner.
Protective-gear cleanup after sewage backs up through a floor drain, tub or toilet in a Seattle house.
Cleanup and drying after river or storm flooding reaches a Seattle-area house, including contaminated Category 3 water.
Drying and cleanup after a Puget Sound windstorm or soaking front drives rain through a Seattle roof, attic or wall.
Drying wet attic insulation, sheathing and ceilings after a roof leak in a Seattle house, one that may have run for weeks.
Pumping and drying a wet crawl space in a Seattle-area house, including sagging insulation and damp vapor barriers.
Containment, removal of affected materials and moisture control for mold that follows water damage in Seattle homes.
A moisture-led mold inspection for Seattle homes, with a written scope you can use whoever does the removal.
How a wet Seattle house is dried to measured readings, from plaster and fir floors to basement slabs and crawl spaces.
Draining, drying and assessing a wet ceiling in a Seattle house, from an upstairs bathroom or a roof leak.
Extraction and drying after a water heater leaks or fails in a Seattle basement, utility closet or crawl space.
Cleanup and drying after a washing machine, dishwasher or icemaker line leaks in a Seattle home, condo or apartment.
Cleanup and drying for Seattle apartments and condos, including leaks that pass through floors and who is responsible.
Water extraction and drying for Seattle offices, restaurants, shops and older masonry buildings, with a plan for staying open.
| Service | Typical range | Details |
|---|---|---|
| Water Damage Restoration | $1,305–$5,707, average about $3,455 | Moisture mapping, extraction and structural drying for Seattle houses, whether the water came down from the roof or up from the ground. |
| Emergency Water Removal | Category 1 $3–$4, Category 2 $4–$6.50, Category 3 $7–$7.50 | Pumps, extractors and moisture checks for standing water in Seattle basements, lower levels and living areas. |
| Basement Water Damage | $1,364–$6,301, average about $3,833 | Extraction and drying for Seattle basements and daylight basements where winter groundwater, window wells or old drains let water in. |
| Burst Pipe Water Damage | $1,305–$5,707, average about $3,455 | Cleanup and drying after a pipe fails in a Seattle house, from corroded galvanized lines to fittings behind plaster. |
| Frozen Pipe Water Damage | $1,305–$5,707, average about $3,455 | Extraction and drying after a freeze splits a pipe in a Seattle crawl space, exterior wall or unheated corner. |
| Sewage Backup Cleanup | Category 1 $3–$4, Category 2 $4–$6.50, Category 3 $7–$7.50 | Protective-gear cleanup after sewage backs up through a floor drain, tub or toilet in a Seattle house. |
| Flood Damage Cleanup | Category 1 $3–$4, Category 2 $4–$6.50, Category 3 $7–$7.50 | Cleanup and drying after river or storm flooding reaches a Seattle-area house, including contaminated Category 3 water. |
| Storm Damage Restoration | $1,305–$5,707, average about $3,455 | Drying and cleanup after a Puget Sound windstorm or soaking front drives rain through a Seattle roof, attic or wall. |
| Roof Leak Water Damage | $1,305–$5,707, average about $3,455 | Drying wet attic insulation, sheathing and ceilings after a roof leak in a Seattle house, one that may have run for weeks. |
| Crawl Space Water Damage | $1,305–$5,707, average about $3,455 | Pumping and drying a wet crawl space in a Seattle-area house, including sagging insulation and damp vapor barriers. |
| Mold Remediation | $1,305–$5,707, average about $3,455 | Containment, removal of affected materials and moisture control for mold that follows water damage in Seattle homes. |
| Mold Inspection and Testing | $1,305–$5,707, average about $3,455 | A moisture-led mold inspection for Seattle homes, with a written scope you can use whoever does the removal. |
| Structural Drying and Dehumidification | $1,305–$5,707, average about $3,455 | How a wet Seattle house is dried to measured readings, from plaster and fir floors to basement slabs and crawl spaces. |
| Ceiling Water Damage | $1,305–$5,707, average about $3,455 | Draining, drying and assessing a wet ceiling in a Seattle house, from an upstairs bathroom or a roof leak. |
| Water Heater Leak Cleanup | $1,305–$5,707, average about $3,455 | Extraction and drying after a water heater leaks or fails in a Seattle basement, utility closet or crawl space. |
| Appliance Leak Water Damage | $1,305–$5,707, average about $3,455 | Cleanup and drying after a washing machine, dishwasher or icemaker line leaks in a Seattle home, condo or apartment. |
| Apartment and Condo Water Damage | $1,305–$5,707, average about $3,455 | Cleanup and drying for Seattle apartments and condos, including leaks that pass through floors and who is responsible. |
| Commercial Water Damage | $1,305–$5,707, average about $3,455 | Water extraction and drying for Seattle offices, restaurants, shops and older masonry buildings, with a plan for staying open. |
Estimates only. Your price is confirmed on site before work starts. See the full price guide.
Tell us what's happening and we'll tell you honestly whether it's a quick fix, and what service should cost.
Call and describe what you see: where the water is, when it started and whether it grows in rain. A technician reads the moisture and traces the source. Extraction and drying are usually the first step whatever the cause.
No. Plumbers, roofers and drainage or side-sewer contractors do the repair. We remove the water and dry the structure, and tell you early which trade you need.
Phones are answered 24/7 for every service. Scheduling is same day when a technician is free, and non-emergency work such as mold inspection is booked at a convenient time.